Skip to content
View in the app

A better way to browse. Learn more.

W3D Hub

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

A Collection of Renegade Assets I've created

Featured Replies

  • Popular Post

I decided I'd release some more assets which I've been making for anyone else to use in their maps.

 

First up is the remake of the Renegade 2 trees to give them more variations so you don't always see the same tree everywhere. The leaf textures has been edited slightly to give them a better hue then the originals, so you can mix and match the old ones with the new ones also.

 

Rene2Trees_zpsb9mnchmi.jpg

Oh and just a heads up, the trees on the right sometimes have issues moving, and will drag every single leaf of that type around if you're not paying attention to which one you select first, and so on. I don't know why it does this, as they are not attached or sharing the same groupings, but I can freely move them around given i select the right one first.

I'm on an empty stomach right now, so ill add to this list as i go :)

 

Here's Some plants I've done with many variations of groups. These can have textures switched out to others, but make sure the texture dimensions are similar to the plant textures you decide.

 

BushAndLavender1_zpsvtgpqhzn.jpg

 

 

 

 

 

Here's Three more simple Pine trees I created.

 

SimplePines1_zpsz7i9anff.jpg

 

 

 

 

Here's my entire set of Renegade "styled" Pine trees, which were based off of the original ones from level edit, but I created all my own leaf variations and set each leaf in place by hand one by one. Again other textures may work with this as is, but would have to follow the same contour of the Renegade stock pine tree branch alpha channel.

 

AllPines_zpsa3zaaftm.jpg

 

 

Here's some sandbags also. Not so highly detailed but good enough that it doesn't blow up your polygon counts.

 

SandBags1_zpsr9jlaa7q.jpg

 

And the Tiberium crystals i made just recently for my newest map. These use 2 passes with simple reflections, nothing that will impact performance.

 

TiberiumCrystals1_zpsocbeg1ar.jpg

 

 

This cabin model took a long time to complete and the polygon count is a tad higher then most at around 34,000 and doesn't have an interior. I was going to originally create an interior for it, but i deleted all my back-faces while optimizing and forgot. There is both a snow version and a non snow version for different scenes.

 

TheCabin_zpshljkhbus.jpg

 

TheCabin1_zpsjo6og5va.jpg

 

 

Renegade 2 Trees New.rar

Bush&Lavender.rar

Simple_Pines.rar

All_PineTrees.rar

Rene SandBags.rar

Tiberium_Crystals.rar

Blazea58Cabin.rar

Those are pretty good :)

Cool, most maps I've seen are either snow, sand, or deciduous forest; so these files will definitely add a missing terrain element.

Will these affect frame rate if many of them are placed?

  • Author

Will these affect frame rate if many of them are placed?

 

Considering almost everything is using the lowest drawcalls (Material selections) possible, i highly doubt there will be lag issues.

 

TreesMax_zpsyqrqatel.jpg

 

I had no problems with this area and that's still with all the other crap around including the trees.

Will these affect frame rate if many of them are placed?

It of course is beneficial to attach them to other like parts (if two meshes use the same texture attach their geometry to make it save a draw call). If you load them onto the map as tiles there will be a bigger hit than if you add them as a single terrain mesh, but this is still better than adding them as simple objects, and vastly better than vehicle objects.

 

Either way, I you can easily place 300 tiles without seeing any slowdown on most computers (Remember all the trees on Zunnie maps?).

Also remember that there is a tradeoff between attaching everything to one object in the terrain vs splitting them if you are using VIS. It makes sense to split the terrain into a few different pieces if possible if you are using vis.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.