Jump to content

Renegade FDS Server Help


Doctor699

Recommended Posts

Hi, so i want to host my own server for CnC Renegade. This is something i haven't done in about a decade now and would like to know how to get it online. Either starting from scratch or how to update the old one to make it compatible with the latest version of Renegade and display on Renlist or the W3D server list. All help would be greatly appreciated.

Attached is a screenshot of the old server FDS console running at the present time. Probably last run about 9 years ago.

renegadefds.png

Link to comment
Share on other sites

The issue is, the server isn't showing up on Renlist. Is it the patch outdate that's preventing it from showing or could it be something completely different?

 

It's not showing any errors, so it should be showing on the list. But for some reason it doesn't even acknowledge that the server is being run, does anyone have any idea why?

Link to comment
Share on other sites

3 hours ago, Doctor699 said:

Still not showing up on W3D hub list or Renlist. A couple more shots of the console. Perhaps it's the version it's running?

This is running with the Dragonade scripts.dll

FDS4.png

FDS42.png

Are your ports open?

Link to comment
Share on other sites

21 hours ago, unknown said:

Are your ports open?

As unknown said, your ports are probably closed.

Go to da.ini, and you will find a Entry called "GameSpyQueryPort", you should open the value of this entry.

If not, you should change "EnableGameSpy" value to "1", if you are not using GameSpy mode in server.ini

But I'd recommend you to use Dragonade's GSA feature, as it sends more data about server.

Edited by The Unstoppable
Link to comment
Share on other sites

the port in DA.ini should NOT be opened it's the port used for remote access (in SSGM this is the port in SSGM.ini) to the server for the bot (reading logs mainly but can also be used to send commands to the server)

the ports you need to open are in server.ini make sure the port that is set there is open (this is the port so players can join), the GameSpyQueryPort is open this is the port used by the server so the gamespy master list knows what servers are online player count etc. which is what's not working right now. lastly the gamespyport must be the same as the port defined in server.ini else gamespy players can't join as it will broadcast the wrong port

 

this might help you too https://www.tiberiantechnologies.org/wiki/index.php?title=Server_owner_guide

https://www.tiberiantechnologies.org/wiki/index.php?title=SSGM_documentation

Link to comment
Share on other sites

the config files seem fine. so that's not it you could try the default GSAquery port and after like a few min if it appeared.

also the serial only matters for XWIS so don't worry about that.

Link to comment
Share on other sites

On 4/30/2020 at 11:52 PM, triattack said:

the port in DA.ini should NOT be opened it's the port used for remote access (in SSGM this is the port in SSGM.ini) to the server for the bot (reading logs mainly but can also be used to send commands to the server)

the ports you need to open are in server.ini make sure the port that is set there is open (this is the port so players can join), the GameSpyQueryPort is open this is the port used by the server so the gamespy master list knows what servers are online player count etc. which is what's not working right now. lastly the gamespyport must be the same as the port defined in server.ini else gamespy players can't join as it will broadcast the wrong port

 

this might help you too https://www.tiberiantechnologies.org/wiki/index.php?title=Server_owner_guide

https://www.tiberiantechnologies.org/wiki/index.php?title=SSGM_documentation

Actually the GameSpyQueryPort= in DA.ini should be open if using DA's GameSpy.

The GameSpyQueryPort= in server.ini doesn't need to be open at the same time.

Link to comment
Share on other sites

10 hours ago, Doctor699 said:

Thank you Tri, i tried the default port, however it still isn't showing. Can i get you on discord sometime to go through this?

If your ISP puts you in a CGN (Carrier-Grade NAT), which is going popular, you have no chance of opening public server. You should get in contact with your ISP to fix this. Additionally if you want to check if you are in CGN, go your router interface, if the WAN IP (generally starts with 100. or 10. for CGN) shown here and a IP service like http://whatismyip.com is NOT the same, you are in a CGN.

 

=== If you are sure you are not in a CGN network, try steps below. ===

 

Often, installed antivirus may prevent you from hosting your own server. Try disabling it for test purposes.

Make sure your GSA port is opened as UDP. And if you are using "GameType" in "server.ini" as "GameSpy", open "GameSpyQueryPort" in "server.ini" as "UDP" in router interface. If you are using "EnableGameSpy" in "da.ini" as "1", open "GameSpyQueryPort" in "da.ini" as UDP in router interface. DO NOT have both of them GameSpy, as this may result showing your server twice in listing. I recommend you to leave "GameType" in "server.ini" to "LAN", and use the "da.ini" GameSpy feature.

Make sure your game port is opened as UDP.

Edited by The Unstoppable
add more items
Link to comment
Share on other sites

3 hours ago, Doctor699 said:

I'm not in a CGN, and i've tried running with the antivirus and firewalls off, but it's still not listing. I've tried what you said Unstoppable, i don't know what else to do. This is all becoming very discouraging. :(

If the "Firewall" you meant is not the firewall at "W F.msc" (without space and quote), so open it and try turning all profiles off temporarily. If that fixes, you can add rules to allow Renegade ports.

Edited by The Unstoppable
War Factory?? wth
Link to comment
Share on other sites

That's me, Unknown diagnosed and resolved it, thank you everyone here for your help as well. The problem wasn't the firewall, but multiple connections, like wireless adapter, vpn, LAN, and that kind of thing. It needed a linear path i guess. Anyway i'm very grateful :) You're all welcome on anytime.

Edited by Doctor699
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...