Jump to content

Printed Armies - 3D printed CnC stuff


Recommended Posts

Welcome (back) to the community! :D

 

:clap:

 

 

Aaaand that is totally the Nod base from C&C_Field! :D

 

Indeed! :D

 

 

I remember you, and your amazing skins and costumes! Excited to see your recent work, and I hope to see Reborn / Tiberian Sun models one day. :)

 

Since I still got all the 3D files from the days working on Reborn on my PC, you will totally see that stuff one day ^^ But just to make it clear, the printing doesn't work that way "extract 3D file from game -> throw it at the printer -> success!!". I basically have to model all the stuff completely from scratch. But having resource material in 3D helps of course to speed up the process, since I got already the right proportions.

 

By the way, want to see the latest stuff I'm working on? ^^

 

hospital.jpg

Link to comment
Share on other sites

3d Printing Stuff

Excellent to see someone actually doing some 3d printing of these models. Just out of curiosity: What material are these printed in?

 

I have no idea how this conjuration magic 3D printing stuff works, I've never had the [staff of Divine Supremacy] budget for just testing gimmicks like that. Looks great though!

Depends on the Printer. Kalle Bowo is using an Ultimaker 2+, which is a Fused Filament Fabrication (FFF) Printer, which basically uses spools of filament (which can contain different material) pushed through a heated extruder to form models. There are also resin-based printers which uses a UV laser to cure liquid resin into a formed model and powder-bed printers which uses a laser to melt powder (similar to filament but usually much more expensive) to form models. There are other more exotic types of printers, but those are generally not used in the current consumer-grade and most of the industrial-grade 3d printer market.

Link to comment
Share on other sites

 

I remember you, and your amazing skins and costumes! Excited to see your recent work, and I hope to see Reborn / Tiberian Sun models one day. :)

 

 

Since I still got all the 3D files from the days working on Reborn on my PC, you will totally see that stuff one day ^^ But just to make it clear, the printing doesn't work that way "extract 3D file from game -> throw it at the printer -> success!!". I basically have to model all the stuff completely from scratch. But having resource material in 3D helps of course to speed up the process, since I got already the right proportions.

This I know, which makes me appreciate your work even more.

Link to comment
Share on other sites

Just out of curiosity: What material are these printed in?

 

I'm printing with PLA. I really like this greyish / silverish look. I tried also white PLA and a cheaper silver PLA so far but both don't look even close as good. I mean one day I will also paint all these models but at the moment it's just nice if they can look really nice even without being painted ^^

 

 

Besides the set, I also like the webpage you have. Did you made your own css or are using a template?

 

I used to be a web designer, but than I took an arrow to the knee ... well, I bought a template on themeforest called Hyper X and made all the design adjustments on my own.

Link to comment
Share on other sites

While the fumes are an issue (therefore ventilation will be needed), you could try printing in ABS rather than PLA. The main advantage of ABS (besides its higher mechanical strength) is the ability to manipulate it with Acetone. You could bond with it, or you can use a process typically called an Acetone Vapor Bath to create nice and smooth surfaces:

JWE_0468.jpg

Might be useful if you plan on selling this somehow, since I'm sure quite a few of these models would benefit from it. And it just looks nice in General!

Link to comment
Share on other sites

PLA is supposed to be biodegradable right? Does that mean your models will melt over time?

 

 

Also how does 3D printing work...you just give the printer a model, some material, and it builds whatever shape you want?

Link to comment
Share on other sites

While the fumes are an issue (therefore ventilation will be needed), you could try printing in ABS rather than PLA. The main advantage of ABS (besides its higher mechanical strength) is the ability to manipulate it with Acetone. You could bond with it, or you can use a process typically called an Acetone Vapor Bath to create nice and smooth surfaces.

 

[...]

 

Might be useful if you plan on selling this somehow, since I'm sure quite a few of these models would benefit from it. And it just looks nice in General!

 

Yeah I heard about that stuff. But I think my models are quite too small and detailed and would rather suffer from the procedure than actually benefit. I am also already quite happy with the results of the Ultimaker. The layer hight is set to 0.1 mm, which is quite fine already. Plus I've heard the procedure is actually not that good for your health, which wouldn't be beneficial if I would be mass producing these miniatures.

 

 

PLA is supposed to be biodegradable right? Does that mean your models will melt over time?

 

 

Also how does 3D printing work...you just give the printer a model, some material, and it builds whatever shape you want?

 

Yes, the material I'm using is biodegradable. But so far I haven't noticed that my models melt away :D I guess if I would throw them in the garden, leaving them exposed to 'wind and weather', that wouldn't be beneficial. But so far, they look just fine sitting here on my desk.

 

About the printing process: You either get a 3D model (from a game, download it somewhere etc), load it up with a so called slicer application (I'm using Cura, the standard from Ultimaker) which basically converts the vectors of the 3D model into the different layers, from bottom to the top, which will guide the print head. In this step you can tweak all kinds of settings, like the layer hight (the more layers, the more details), temperature, speed etc. and afterwards you export the data as a so called GCode to a SD card, put it in the printer, turn on the printer, select a model and wait a couple of hours until the model is finished.

 

But.

 

Not everything can be printed as you might imagine it. First of all models from games are barely printable out of the box. They are optimized for gaming (therefore have usually few polygons = your model will look edgy), the geometry isn't closed, normals are inverted, all kinds of problems. I figured out the only way to get proper results is to model everything from scratch, giving you full control over every detail. If something doesn't work in the printing process, you will know why it doesn't work.

 

In general the printer works additive from bottom to the top. Going upwards up until a 45° angle gives you still nice results, but everything in between 45° and 5° just doesn't result in smooth surface areas. Printing additively also means you can't print stuff that's floating in the air. You could tell Cura to print so called support structures underneath otherwise floating objects. But you have to remove them manually afterwards which results in an unclean surface area as well. That's why I like to cut the models into different printable pieces and glue them back together afterwards. Moreover the slicing software works also as a kind of previsualization. You can actually see how your model will turn out. Here you can already see if certain details are too small or if they clump together, if they are streched somehow etc. Which means now it's back again to your 3D modeling program to work on those details again. So it's a back and forth until you're happy with this previsualization and actually start printing. And normally you will see a couple of details you are still not happy with only after you hold the printed model in your hand. I mean In the end it's molten plastic, it behaves still a bit different than the software predicts. That means it's a constant loop of rapid prototyping until you are finally happy with your model. Let's use the Construction Yard as an example.

 

Step 01: Decide on a model you want to make.

 

step01.jpg

 

 

Step 02: Gather as much as possible reference materials.

 

step02.jpg

 

 

Step 03: Modeling. Keep in mind that floating stuff isn't possible. And if you don't want to use support structures, you need to disassamble those critical areas, such as the crane.

 

step03.jpg

 

 

Step 04: Previsualize in Cura. See critical areas, go back to your 3D software, work on those areas. Repeat until you are happy.

 

step04.jpg

 

 

Step 05: Export GCode, print this thing, wait a couple of hours and hope everything turns out fine.

 

step05.jpg

 

 

Step 06: Glue the parts back together.

 

step06.jpg

Link to comment
Share on other sites

It's not solid. It doesn't have to be solid. It's filled with this grid pattern, which is called "infill" and is calculated by the slicer software. Default settings are 20% infill, which means the grid pattern consists of 20% PLA and 80% air.

 

This doesn't sound like much, but I think the models are already quite durable. I didn't try to break one on purpose, but they don't seem that fragile to be honest. And I mean in the end they are just miniatures, you put them somewhere and look at them. Having a 20% plastic grid inside makes them already stronger than all the models of tanks and planes and whatsoever that you buy for instance from Revell, which are all hollow. These will actually break more easily than my models.

post-11429-0-35720600-1478043612_thumb.jpg

Link to comment
Share on other sites

Do you ever take requests?

 

At leats not until now. Some people already asked for the TW Mammoth Tank, one dude wanted the Soviet Nuclear Silo from RA2 ... but I'm really feeling like finishing the TD stuff first, so I got a complete collection, a finished project. But I put these wishes on a list for later.

 

The tricky thing with jumping from game to game is also the scale of the objects. I want to build everything that way that every piece from every game fits together with the all the other pieces from the other games.

 

By the way, why do you ask?

Link to comment
Share on other sites

Incredible stuff as always! If you ever want to make some Red Alert 2 stuff, feel free to poke us for models to convert. We stick to a super-high standard of accuracy in RA2:AR. ;)

Link to comment
Share on other sites

I may have some models that could be 3d printed, if you're interested. Some of them are off the wall, but some of them look really nice.

 

I'd say maybe upload them somewhere, send me the link and I will have a look if they are printable out of the box or if they need much work.

 

 

Incredible stuff as always! If you ever want to make some Red Alert 2 stuff, feel free to poke us for models to convert. We stick to a super-high standard of accuracy in RA2:AR. ;)

 

Thanks for the compliment and also for the offer. Your models look nice, indeed! I will ping you when I'm approaching AR2 for printing :)

Link to comment
Share on other sites

Incredible stuff as always! If you ever want to make some Red Alert 2 stuff, feel free to poke us for models to convert. We stick to a super-high standard of accuracy in RA2:AR. ;)

To be fair, there is a model that isn't really accurate. :v (Not including the placeholders.)

Link to comment
Share on other sites

  • 4 weeks later...

Welcome back Kalle Bowo!!! Also let me know if you start making some TS/FS models :D

 

Thanks! I will probably start with TS next year. I'm so close to finishing the TD set. Only the civilian hospital, GDI's Advanced Comm Center and Nod's Bio Research Lab are on the list. But I somehow just don't find the time at the moment. And then there's already Christmas next month ... curses ! ^^

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...